Fishing Pomme De Terre Lake
By Marc Rogers
Pomme De Terre Lake is located in South Central Missouri approximately 50 miles north of Springfield Missouri. The impoundment is approximately 7,800 acres at normal pool with over 100 miles of shoreline. Pomme De Terre Lake was created in 1961 when the Army Corp of Engineers completed the dam on the Pomme De Terre River. A major tributary of the lake is Lindley Creek. The normal lake lever is 841 feet above mean sea level but water levels change as needed to control water flow below the dam. It is common to see lake levels from 838 to 852 feet with maximum flood levels of 874 feet above mean sea level. At the full flood control level the lakes expands to over 16,000 acres.
There are many homes and cabins built above the elevation of 879 feet because the Army Corp of Engineers owns the land below this level. However, there is little shoreline development due to fluctuating water levels. Several marinas operate on the lake offering fuel, boat rentals and food service. Floating private docks are allowed with permits required from the Army Corp of Engineers.
The shoreline consists of mostly forested land with irregular features. Shoreline is a mixture of gravel and clay with limestone cliffs and outcroppings in numerous areas. Large boulders and rocks are plentiful close to cliffs and sharp shoreline areas. Along the shoreline there is still standing timber present while the main lake was cleared during lake construction. Also, smaller creek arm coves have numerous areas of standing timber still left in the water. Limited areas of vegetation are present in some areas.
The water is generally clear in the main lake with murky conditions occurring in the upper ends of the river and creek arms during times of rainy conditions. It is not uncommon to see visibility in the main lake of 6 – 8 feet.
There are many local businesses providing services for lake visitors including restaurants, camping supplies, marine service and lodging. Clearlight Inn and Lake View Lodge (417-745-6485) provide ample boat parking and electrical hook-ups for visiting anglers. Both are located near Carson’s Corner with a store, fuel and restaurant located close by.
Pomme De Terre is home to numerous species of fish. The most popular game fish are the bass, crappie and muskie. Muskie stocking began in the lake in 1966 and has continued ever since. Many consider the lake the best muskie fishery in the Midwest. There are several muskie tournaments held each year on Pomme De Terre and a local Chapter of Muskies Inc. (Pomme De Terre Chapter) host most of these events. They have a website that is designed and maintained by the Regional Vice-President, Earle Hammond. The site address is http://www.missourimuskies.org. Earle is also a guide on Pomme De Terre specializing in muskie fishing. His muskie fishing guide service web address is http://www.pommemuskieguideservice.com.
Muskies do not reproduce naturally in the lake and require regular stocking for the fishery to produce trophy fish. Most of the muskie stocking in Missouri is done in Pomme De Terre but several other waters do receive limited stocking of muskie. In fact, the state record came from Lake of the Ozarks in 1981. Up until 1981 the records all came from Pomme De Terre. However, in 1967, 225 muskie were stocked in Lake of the Ozarks and few were ever caught. The state record came from this stocking and was 49 ½ inches long. It tipped the scales at 41 pounds 2 ounces.
Walleye have also been stocked in Pomme De Terre and they have developed a loyal following of anglers. Bass anglers catch most of the walleye accidentally. Walleye are the most active during night in the spring but many anglers drift jigs and live bait in an attempt to catching the walleye that lurk in the lake.
Bass fishing at Pomme De Terre is very popular among anglers. The lake is home to an abundant population of Large Mouth Bass, Spotted Bass and Small Mouth Bass. There are many bass tournaments held on the lake each year. From spring through fall an angler can find a tournament to compete in on most weekends. Several tournament circuits have monthly events on Pomme De Terre including Joe Bass Team Trail and Anglers in Action. It is not uncommon for the winning weights of these one-day events to push the scales to 20 pounds or more with a five bass limit.
Bass fishing is good year round for anglers on Pomme De Terre. The largest bass are generally taken in the spring when the females are in the pre-spawn to spawning stage. The largest bass I have taken from Pomme De Terre was just over 6 ½ pounds but there are many bigger ones swimming in the lake. There have been numerous tournaments when the big bass award was won with a fish over eight pounds.
Midwest Fishing Tackle Pro-Staff members Aaron and Alton Hunter are regulars on the lake. They compete in about 20 tournaments each year on Pomme De Terre. They report that spring is the best time to catch a trophy bass but the lake is a productive bass fishery year round. The father/son team has caught numerous trophy bass in Pomme De Terre and report “the best lure for the big bass is the All-Terrain Tackle, Football Jig”. Aaron says, “Jig fishing is a slower presentation but produces the bigger bite.” Alton reports “the textured head design of the All-Terrain Tackle Jigs allow me to feel the bottom better.”
When the bass are aggressive both prefer to fish soft plastic jerk baits like the Zoom Super Fluke. Their color of choice is watermelon and they dye the tail chartreuse. Aaron says, “An off-set worm hook is the best hook for this lure.” “I have tried all the styles of hooks available and this hook gives me better hook-set percentages than any. The most popular hooks are the wide gap style but these cause me to miss more bass because the lure fills the gap of the hook.” This duo once caught over 100 bass per day for two days straight presenting the Zoom Super Fluke in shallow water to aggressive male bass preparing for the spawn.
On an April weekend in 2008 Aaron and Alton won back-to-back tournament on a Saturday and Sunday. During the two days they caught three bass over seven pounds from the same submerged bush. During the two days their combined weights of five bass limits were pushing the 40-pound mark. All of these bass were taken on a football head jig from All-Terrain Tackle. Aaron said “we fish our jigs a little different than most anglers” but he would not elaborate with any further details.
When water temperatures break the 50-degree mark the two best choices for bass are a jig and jerk-bait. Anglers should present the jig slowly to entice bass to bite. As in most bodies of water the jig and trailer will generally produce larger fish. The second choice is a jerk-bait worked slowly beneath the surface. My favorite jerk-baits are the Lucky Craft Staysee 90 in shad colors and the Rapala X-Rap also in shad colors. The Staysee 90 will reach greater depths than the X-Rap and will suspend better in colder water. However, the X-Rap with two Storm Suspend Dots placed just behind the bill makes this lure very comparable to the Lucky Craft lure. Main lake and secondary points are always the first place I look for bass during these conditions.
When the water surface temperatures approach the 60-degree mark the smaller male bass will become very active near the shoreline cover. Again, jerk-baits and jigs will catch these fish. However, the larger females will most likely be found in 6 – 10 feet depths and crankbaits are the most productive. Crawdad colored crankbaits should be the first choice of anglers trying to catch a trophy bass under these conditions.
At approximately 65-degree surface temperatures the bass will start to migrate to the post-spawn areas of the lake. The larger females will be harder to catch during this time while the smaller males may still be abundant in the shallow waters guarding the nests and young fry. Shallow running crankbaits, plastic worms or lizards and top-water lures are productive on the male bass. The larger females can be taken on Carolina rigs and crankbaits running in the 6 – 12 feet deep range.
As summer approaches the bass will move to deeper water near the Thermocline (usually about 20 feet deep) and hold there until the lakes starts its fall turn-over. The larger bass are generally not taken in water less than 10 feet deep during the summer months on Pomme De Terre. There are times when top-water lures will bring them up from the depths during the summer. A slower moving top-water, like the Zara Spook or Pop-R, is my choice for top-water during the summer. The most productive summer time bass lure at Pomme De Terre is a large plastic worm. My choice for big plastic worms is the Gambler 13-inch Ribbon Tail worm.
Once the water temperatures begin to cool in late summer bass can be caught at almost any depth. Anglers are wise to watch for schools of shad on the surface and target the bass following them. Numerous bass can be taken on top-water baits while the bass are feeding on shad but the larger ones are generally located several feet below the shad while feeding. A deep running shad imitator is my lure of choice for the bigger bass during this time. A lipless crankbait is also a good choice for anglers.
As in most lakes in the Midwest the winter season is the least productive for bass fishing. The bass’ metabolism slows with the colder water and they require little food for survival. Winter lure choices should include slow moving baits like the jig and trailer. The presentation should be slow and at depths of 10 feet or greater. Also, a suspending jerk-bait presented very slowly can be productive for Pomme De Terre winter bass.
Pomme De Terre Lake is a great choice for bass anglers because it is located between two very popular lakes that receive most of the tourism and recreational boating traffic. Lake of the Ozarks to the Northeast and Table Rock to the South attract most of the recreational boating traffic. Pomme De Terre Lake is seldom crowded with boat traffic and this makes angling much easier.
Visit Midwest Fishing Tackle for tackle in this article and Bass Fishing Midwest for more news and articles
Midwest Fishing Tackle, Exclusive retailer of Midwest Custom Tackle
Wednesday, May 13, 2009
Wednesday, December 31, 2008
Plastic Worm Basics
Many anglers feel the plastic worm is the most versatile lure available. It can be fished from top to bottom and all depths in between. Plastic worms can be rigged weed-less, with an exposed hook and with or without any weight added. There are countless styles of plastic worms from straight bodies and tails to ribbon style tails for more action. The five major techniques of fishing plastic worms are Texas rig, Carolina rig, Split Shot rig, Shaky Head (fished with a jig head) and floating (top-water).
The Texas rig is generally the most used among anglers. It is a bottom bouncing presentation and can be worked at varying speeds. The rig consists of a hook, sinker and worm. There are special sinkers made for this technique which is bullet shaped and slide on the line above the hook and worm. The rig is fairly inexpensive for the basic components. However, there are specially made sinkers and hooks that do cost more than the basic set-up.
The Texas rig with a bullet slip sinker is great for most applications. However, if the angler wants to present the worm in heavy grass or timber a sinker that is pegged to the top of the worm head is best. This allows the sinker to stay in contact with the worm so the whole rig will fall together. If the sinker isn’t pegged many times the sinker will fall while leaving the hook and worm above the grass or over a tree limb.
There are two popular ways of keeping the sinker attached to the head of the worm. The first is to use a toothpick and insert the point into the hole of sinker “pegging” the link to the sinker. The sinker is then pushed securely against the head of the worm where it will stay. The disadvantage of this technique is it can cause line damage, thus weakening the line.
The alternative to this approach is use a screw in type sinker. This is often called the Florida Rig (Gambler Lures was the first to produce this type of sinker) where the sinker has a small spring molded into the bottom of a bullet sinker. The line slips through the sinker just as the regular slip sinker and then the sinker is screwed onto the head of the worm to secure the whole rig together. There must be about one quarter inch of the worm head above the eye of the hook for this rig to work properly. The disadvantage of the Florida Rig is it causes the head of the worm to be torn up more often due to the spring being inserted into the worm. An angler may go through a few more worms in a day but I feel the advantage is greatly worth the additional cost of a few worms. I use this rig exclusively when fishing the Texas rig worm.
The Carolina rig is a great way to present most any plastic lure and is very similar to the Texas rig at the hook. The difference is in the way the weight is attached to the line. With the Carolina rig the plastic worm (lizards are also a very popular plastic lure with this technique) is attached to the hook the same as the Texas rig. The angler then uses a leader of varying lengths (commonly from 12 inches to 48 inches) and ties it to a barrel swivel. The sinker is slid onto the main line (the line from the reel spool) and ties the other end of the swivel to the main line. The most common sinker for this application is an egg sinker of one quarter to one ounce in weight. My personal choice is generally a three quarter ounce sinker but I will change weights when conditions require. Also, I generally use a 48-inch leader when using this technique.
The Carolina rig is a great way to present soft plastic lures in deep water while allowing for a faster retrieve. The slowest presentation requires the angler to simply drag the sinker along the bottom, which allows the lure to sway behind. Many times the sinker dragging on the bottom will get the fish’s attention and the lure will cause the bites. The sinker kicks up silt from the bottom similar to the way a crawdad does while looking for food or escaping from prey.
If the fish seem to be active and willing to hit a faster moving lure I will use a retrieve where I lift the sinker off the bottom and allow it to fall on a tight line. The tight line is necessary to be able to detect strike when they occur. This retrieve allows me to cover more water and still have the advantage of the plastic worm. It can be worked much faster than a Texas rig worm.
A plastic worm can also be used with a split shot technique. This technique is a modified Carolina rig in that the swivel isn’t commonly used. Also, it is used when smaller plastic worms are called for with light line. It is a plastic worm rigged just like the Texas rig worm and the weight is added above the lure using a split shot sinker. There are now available some slip sinkers that resemble a tube shape and can be pegged at varying lengths above the lure and hook. The pegging can be done with a tooth pick or a special tool similar to a needle thread tool that allow the angler to pull some rubber skirt material through the sinker hole. The advantage to this is the angler can later adjust the length of line between the lure and the sinker.
In recent years the Shaky Head worm presentation has become popular. It is, for the most part, a new style of finesse fishing. However, this technique can be used with heavier equipment as well. Shaky worms are generally a straight worm from four to seven inches long with the most common length about five inches. This approach is a worm on a jig head made especially for the presentation. There are several styles of shaky head jig ranging from football shaped heads to round heads. There is some type of attachment point on the jig head for the head of the worm to attach while the hook point is inserted into the body of the worm to keep it from hanging up on rocks and cover. When using the shaky head presentation the Gambler Giggy Head is my choice due to the worm easily coming loose from the head during the hook set. When the worm comes loose it has less chance of covering the hook point and preventing a good hook set.
The floating worm is a great technique to fish with a top-water approach. Floating worms are nothing more than a worm and a hook usually fished on light line. Some anglers do add a swivel in front of the worm to avoid line twist as the worms does cause this during the retrieve. To avoid line twist while not using a swivel it is best to rig the worm so it lies straight with either an exposed hook or the point inserted into the worm body like a Texas rig.
There are many manufacturers of floating worms and some are made of material that is similar to closed-cell foam. Choose worms made for this technique as they will be the most buoyant and stay on the top of the water. Retrieve speed can be adjusted as needed but I always start with a slow retrieve and change it to a faster retrieve if the fish appear to be more active.
When choosing colors of plastic worms a good approach is for dirty water start with a dark color worm. In clear water an angler should use a lighter color similar to the natural forage. When fishing at night a long (ten inches or longer) worm is a great choice in dark colors. As with all fishing don’t be afraid to experiment with different colors and styles of worms. Let the fish tell you what they are most interested in with the current conditions.
Copyright 2008, Marc Rogers, all rights reserved
Midwest Fishing Tackle
The Texas rig is generally the most used among anglers. It is a bottom bouncing presentation and can be worked at varying speeds. The rig consists of a hook, sinker and worm. There are special sinkers made for this technique which is bullet shaped and slide on the line above the hook and worm. The rig is fairly inexpensive for the basic components. However, there are specially made sinkers and hooks that do cost more than the basic set-up.
The Texas rig with a bullet slip sinker is great for most applications. However, if the angler wants to present the worm in heavy grass or timber a sinker that is pegged to the top of the worm head is best. This allows the sinker to stay in contact with the worm so the whole rig will fall together. If the sinker isn’t pegged many times the sinker will fall while leaving the hook and worm above the grass or over a tree limb.
There are two popular ways of keeping the sinker attached to the head of the worm. The first is to use a toothpick and insert the point into the hole of sinker “pegging” the link to the sinker. The sinker is then pushed securely against the head of the worm where it will stay. The disadvantage of this technique is it can cause line damage, thus weakening the line.
The alternative to this approach is use a screw in type sinker. This is often called the Florida Rig (Gambler Lures was the first to produce this type of sinker) where the sinker has a small spring molded into the bottom of a bullet sinker. The line slips through the sinker just as the regular slip sinker and then the sinker is screwed onto the head of the worm to secure the whole rig together. There must be about one quarter inch of the worm head above the eye of the hook for this rig to work properly. The disadvantage of the Florida Rig is it causes the head of the worm to be torn up more often due to the spring being inserted into the worm. An angler may go through a few more worms in a day but I feel the advantage is greatly worth the additional cost of a few worms. I use this rig exclusively when fishing the Texas rig worm.
The Carolina rig is a great way to present most any plastic lure and is very similar to the Texas rig at the hook. The difference is in the way the weight is attached to the line. With the Carolina rig the plastic worm (lizards are also a very popular plastic lure with this technique) is attached to the hook the same as the Texas rig. The angler then uses a leader of varying lengths (commonly from 12 inches to 48 inches) and ties it to a barrel swivel. The sinker is slid onto the main line (the line from the reel spool) and ties the other end of the swivel to the main line. The most common sinker for this application is an egg sinker of one quarter to one ounce in weight. My personal choice is generally a three quarter ounce sinker but I will change weights when conditions require. Also, I generally use a 48-inch leader when using this technique.
The Carolina rig is a great way to present soft plastic lures in deep water while allowing for a faster retrieve. The slowest presentation requires the angler to simply drag the sinker along the bottom, which allows the lure to sway behind. Many times the sinker dragging on the bottom will get the fish’s attention and the lure will cause the bites. The sinker kicks up silt from the bottom similar to the way a crawdad does while looking for food or escaping from prey.
If the fish seem to be active and willing to hit a faster moving lure I will use a retrieve where I lift the sinker off the bottom and allow it to fall on a tight line. The tight line is necessary to be able to detect strike when they occur. This retrieve allows me to cover more water and still have the advantage of the plastic worm. It can be worked much faster than a Texas rig worm.
A plastic worm can also be used with a split shot technique. This technique is a modified Carolina rig in that the swivel isn’t commonly used. Also, it is used when smaller plastic worms are called for with light line. It is a plastic worm rigged just like the Texas rig worm and the weight is added above the lure using a split shot sinker. There are now available some slip sinkers that resemble a tube shape and can be pegged at varying lengths above the lure and hook. The pegging can be done with a tooth pick or a special tool similar to a needle thread tool that allow the angler to pull some rubber skirt material through the sinker hole. The advantage to this is the angler can later adjust the length of line between the lure and the sinker.
In recent years the Shaky Head worm presentation has become popular. It is, for the most part, a new style of finesse fishing. However, this technique can be used with heavier equipment as well. Shaky worms are generally a straight worm from four to seven inches long with the most common length about five inches. This approach is a worm on a jig head made especially for the presentation. There are several styles of shaky head jig ranging from football shaped heads to round heads. There is some type of attachment point on the jig head for the head of the worm to attach while the hook point is inserted into the body of the worm to keep it from hanging up on rocks and cover. When using the shaky head presentation the Gambler Giggy Head is my choice due to the worm easily coming loose from the head during the hook set. When the worm comes loose it has less chance of covering the hook point and preventing a good hook set.
The floating worm is a great technique to fish with a top-water approach. Floating worms are nothing more than a worm and a hook usually fished on light line. Some anglers do add a swivel in front of the worm to avoid line twist as the worms does cause this during the retrieve. To avoid line twist while not using a swivel it is best to rig the worm so it lies straight with either an exposed hook or the point inserted into the worm body like a Texas rig.
There are many manufacturers of floating worms and some are made of material that is similar to closed-cell foam. Choose worms made for this technique as they will be the most buoyant and stay on the top of the water. Retrieve speed can be adjusted as needed but I always start with a slow retrieve and change it to a faster retrieve if the fish appear to be more active.
When choosing colors of plastic worms a good approach is for dirty water start with a dark color worm. In clear water an angler should use a lighter color similar to the natural forage. When fishing at night a long (ten inches or longer) worm is a great choice in dark colors. As with all fishing don’t be afraid to experiment with different colors and styles of worms. Let the fish tell you what they are most interested in with the current conditions.
Copyright 2008, Marc Rogers, all rights reserved
Midwest Fishing Tackle
Tuesday, October 14, 2008
Fishing Buddies
The Making of Life-Long Fishing Buddies
At the age of ten years old a young boy didn’t realize he was developing a relationship that would last a lifetime. He visited the home of a man who would become a life-long fishing partner while on a family vacation. The visit took place in the suburbs of Atlanta, Georgia in 1974.
The boy already had shown a strong interest in the outdoors while especially enjoying fishing. He had regularly fished in a small creek near his home happy to catch anything that would bite. Panfish and catfish were the most common catch in this small body of water that most adults could have stepped across in many places.
Fishing equipment wasn’t important as a tree limb and short piece of line were many times his only option. A regular fishing hook was great to have but at times a safety pin had to do. If a bobber was needed his mother would tie a short piece of tree limb to the line several inches above the “hook” for a strike indicator. It was a simple but effective way to catch the eager fish in the small creek.
The man who later became his fishing partner also started fishing with similar equipment about 30 years earlier. He grew up near the shores of the Mississippi River in Southeast Missouri during a time of what many later called rough times. He later joined the United States Air Force and it is rumored he lied about his age as he was too young to have joined. He served his country stationed in New York where he met his wife of over forty years. They moved to Atlanta and called it home for many years where they raised a family together.
The young boy also grew up in the same area of Southeast Missouri while he developed his love of fishing much the same way. On this vacation his family was in route to Florida for a vacation and stopped in to visit the boy’s uncle in Atlanta where the two talked about fishing.
They stayed with his uncle for a couple of days and went fishing together at a local “pay-by-the-pound” trout pond. The young man had such a great time they planned another trip together that was to take place soon. It just so happened the boy’s uncle visited his home in Missouri where the subdivision had a two acre pond and they spent much of the time together on the shore of this pond.
They fished for anything that would accommodate them and enjoyed the time together. The following spring the boy once again visited Atlanta for another trip. However, this time it wasn’t a family vacation. The boy flew to Atlanta alone where his uncle picked him up at the airport gate. They spent time fishing all over the states of Georgia and Alabama together for a whole week.
These annual trips continued for the next several years until the young man was old enough to drive. From that day forward he drove to Atlanta often times taking a friend to fish with his favorite uncle. They would fish any body of water they thought fish might hide.
One memorable trip was to Warm Springs, Georgia where the boy’s uncle had a friend who loaned them a place to stay on a private lake about 60 acres in size. Every trip was an adventure and this one was no exception.
When they arrived at the lake they made a temporary home in a borrowed mobile home on the shores of the lake. The place hadn’t been used in several years and was full of many insects that had also called the place home before their death. Needless to say there were dead bugs everywhere. However, eager to catch some of the big southern large-mouth bass rumored to lurk in the waters, there was no time to do much housekeeping.
They set out in a borrowed johnboat and an electric motor attached to the back. The two could not have been happier spending time together and sharing a boat. Many fish were caught that day and the boy caught his first large-mouth over seven pounds.
When not fishing together the two of them were talking about prior trips and those to come. During the years they fished together from Mark Twain Lake in Northeast Missouri to Lake Okeechobee in Florida and many places in between.
When this friendship began the “old-man” was teaching the young boy about fishing. However, due to these early lessons the young man became much better at fishing and was able to teach his uncle a few things as well. The pair has enjoyed many days on the water together over the last 35 years. They don’t get to fish much together anymore but not a fishing trip goes by that the boy’s uncle isn’t remembered to some degree.
Many stories are told about when the two shared the water together. The boy is now a grown man with a two sons of his own. He takes them fishing every chance they get and passes along the lessons he learned from his uncle. The stories are shared of the “old times” with his uncle and all the big fish they caught together. I know for sure the “boy” has been heard to say that this uncle has had the most influence on his fishing over the years. He always refers to him as his “favorite uncle” and this was no doubt because of the time they spent together on the water.
This story has been written for two reasons. To honor the man who spent much time developing the love of the outdoors and fishing of a young man and to encourage others to take a child fishing. Doing so can form a bond that will last a lifetime.
Special note: This story was inspired by the relationship I had with my mother’s brother. I owe a special thank you to my Uncle Larry for his fishing lessons over the years. While we lived over 600 miles apart he always made time to take me fishing.
Copyright 2008, Marc Rogers, all rights reserved.
Sunday, August 10, 2008
Small Waters in Winter
SMALL PONDS IN LATE WINTER CAN BE VERY PRODUCTIVE
By late February most avid anglers have had a severe case of cabin fever for several months. With spring just around the corner most of us can hardly wait until the fish begin to move into the shallow water to begin the spawn.
In the Midwest’s larger reservoirs the pre-spawn can begin in early March. However, most years it begins in late March to early April and the spawn can last through the middle of May. However, there is a way to fish waters where the spring transition occurs earlier without having to travel very far from home.
Most anglers that fish the larger reservoirs began their love of fishing on small lakes and farm ponds. These same small waters are the very ones which warm the fastest in the spring and cause the fish's activity level to accelerate accordingly. While the big waters have surface temperatures in the fifty degree range it is possible to find ponds and small lakes with water temperature in the sixty degree range. That ten-degree difference can be the difference between having a very productive day and very few fish landed.
Those anglers fortunate enough to own a big bass boat and high powered outboard will have no advantage over the angler who walks the bank in search of his/her fish. This type of fishing can be the most peaceful angling outing you can have. I suggest you leave your boat at home and walk the bank because very few small lakes and ponds have boat ramps and those that do have very conservative horsepower limits.
Most anyone can afford the equipment needed to effectively fish small waters. One medium action rod and reel and a small tackle box filled with a variety of basic lures is all that is necessary. Lures called favorites on the big lakes are usually just as effective on the small ponds. However, smaller versions of these are sometimes necessary depending on the size of the fish in the pond you choose. If a list of favorite pond lures existed it would have to include the four and six inch plastic worms, one quarter ounce spinner bait and buzz bait and small top-water baits like the Pop R and Zara Pooch.
The ideal ponds for productive fishing are private farm ponds. These usually receive very little fishing pressure and have the potential of holding a few large fish. If you have permission to fish private ponds make sure to treat the land and water better than if it were your own. Leave behind no sign of your presence and release all fish unless the owner gives you explicit permission as to the kind and number of fish you are allowed to keep. Also you should never return to the pond without the owner's knowledge and never take anyone with you without first discussing it with the owner. Always remember that because a pond holds good fish doesn't justify your trespassing to fish in it. To show your appreciation you should offer to share the fish you keep with the owner.
For those anglers not fortunate enough to have access to the private ponds do not overlook the community lakes and ponds in local parks. Few seasoned anglers fish these public waters and while not as common, many large fish have come from such waters in the past. To locate these public fishing areas contact your local conservation office or parks department. These offices are always willing to help with information on the species of fish available and area regulations if they differ from statewide laws.
Late this winter when all of your tackle boxes are organized and your hooks all sharpened you too should try pond fishing. In the Midwest region late February is not too early to get started refining your angling skills for the up-coming fishing season. You just might have one of your best fishing days ever and even if it proves to be not very productive, it still beats watching someone else catch fish on television.
Copyright 2008, Marc Rogers
www.midwestfishingtackle.net
By late February most avid anglers have had a severe case of cabin fever for several months. With spring just around the corner most of us can hardly wait until the fish begin to move into the shallow water to begin the spawn.
In the Midwest’s larger reservoirs the pre-spawn can begin in early March. However, most years it begins in late March to early April and the spawn can last through the middle of May. However, there is a way to fish waters where the spring transition occurs earlier without having to travel very far from home.
Most anglers that fish the larger reservoirs began their love of fishing on small lakes and farm ponds. These same small waters are the very ones which warm the fastest in the spring and cause the fish's activity level to accelerate accordingly. While the big waters have surface temperatures in the fifty degree range it is possible to find ponds and small lakes with water temperature in the sixty degree range. That ten-degree difference can be the difference between having a very productive day and very few fish landed.
Those anglers fortunate enough to own a big bass boat and high powered outboard will have no advantage over the angler who walks the bank in search of his/her fish. This type of fishing can be the most peaceful angling outing you can have. I suggest you leave your boat at home and walk the bank because very few small lakes and ponds have boat ramps and those that do have very conservative horsepower limits.
Most anyone can afford the equipment needed to effectively fish small waters. One medium action rod and reel and a small tackle box filled with a variety of basic lures is all that is necessary. Lures called favorites on the big lakes are usually just as effective on the small ponds. However, smaller versions of these are sometimes necessary depending on the size of the fish in the pond you choose. If a list of favorite pond lures existed it would have to include the four and six inch plastic worms, one quarter ounce spinner bait and buzz bait and small top-water baits like the Pop R and Zara Pooch.
The ideal ponds for productive fishing are private farm ponds. These usually receive very little fishing pressure and have the potential of holding a few large fish. If you have permission to fish private ponds make sure to treat the land and water better than if it were your own. Leave behind no sign of your presence and release all fish unless the owner gives you explicit permission as to the kind and number of fish you are allowed to keep. Also you should never return to the pond without the owner's knowledge and never take anyone with you without first discussing it with the owner. Always remember that because a pond holds good fish doesn't justify your trespassing to fish in it. To show your appreciation you should offer to share the fish you keep with the owner.
For those anglers not fortunate enough to have access to the private ponds do not overlook the community lakes and ponds in local parks. Few seasoned anglers fish these public waters and while not as common, many large fish have come from such waters in the past. To locate these public fishing areas contact your local conservation office or parks department. These offices are always willing to help with information on the species of fish available and area regulations if they differ from statewide laws.
Late this winter when all of your tackle boxes are organized and your hooks all sharpened you too should try pond fishing. In the Midwest region late February is not too early to get started refining your angling skills for the up-coming fishing season. You just might have one of your best fishing days ever and even if it proves to be not very productive, it still beats watching someone else catch fish on television.
Copyright 2008, Marc Rogers
www.midwestfishingtackle.net
Game Plan for Fishing
DEVELOPING A GAME PLAN FOR UNFAMILIAR WATER
Your fishing trip has been planned for many weeks. You and your favorite fishing partner have gone over every detail to assure nothing has been forgotten. The night before leaving you will find it hard to sleep. The thoughts of where and how you will catch the fish have been filling your mind most of the night. The reasons for the meticulous planning are because you have limited time on the water and you have never been on the body of water you are about to visit.
When most anglers arrive at an unfamiliar body of water they have already obtained as much information about it as possible. Anglers are notorious for knowing what the fish are being caught on before they ever leave home. We will have our whole weekend planned around how others have caught fish at our destination. However, the information we receive may not be current or even correct. The information may have come from a newspaper fishing report that is only as good as its source. While I was on a guided trip in Florida’s Lake Okeechobee, the guide told me when the local newspaper and radio stations contact him he will either tell them the productive lures or the areas, but never both. The best way to avoid the problems of other angler's information is to listen but remember it is not etched in stone. Fishing is a very dynamic sport where productive methods can change in a very short time.
Many anglers feel that most productive fishing days are the result of a systematic, analytical approach. The best way to get started is to eliminate as much water as possible; break down the whole area into many small areas; eliminate water considered very deep for the particular body of water. Bass are generally more active when positioned in shallow water. The most important things to consider when developing a game plan are the type of water you are fishing, the time of the year, water condition, and weather condition.
The type of water will play a major role in the areas and lure types I begin with. When I refer to type of water these questions arise. Are you going to fish a shallow lake or river where anglers consider deep water ten feet or more; are you visiting a mid-land reservoirs where there are lots of small creek and a few large river channels present; or is your destination a high-land lake where there are sheer bluff walls and deep, clear water? The answer to this question is the first step in a series of items you must consider. The others, though they seem simple, are major pieces to the puzzle.
The time of year must be considered. Fish will behave certain ways during particular seasons. During winter months the water temperature is cold and the fish are lethargic. In the summer fish tend to be the most active but can become lethargic when the water temperatures rise to extremes and the oxygen levels fall. Water condition, particularly temperature and clarity, must be thought about carefully. Bass are a cold blooded creature and their metabolism is directly affected by the water temperature they live in while water clarity dictates how well and far fish can see in the water. All of these things play a part in the sport we call fishing. When you arrive at your destination consider all the things mentioned and use past experiences to get started. Also, look for areas like points, roadbeds, ledges and breaks, underwater humps, and ditches. These types of structures have proven to hold concentrations of fish.
Points have long been a productive place for anglers. Bass use them for migrations routes and staging areas when traveling between deep water. As air and water warm in the spring bass move up from deeper water into shallow areas to spawn. During the summer they will often travel from deep to shallow water on a daily basis. They will move to the shallow areas at night as the surface water cools and return to deep water as temperatures began to rise during the day time hours. Points have long been a favorite of both the bass and the angler.
Roadbeds are used by bass as migration routes and they are also easily found by anglers. A good topographical map is an excellent tool for finding roadbeds, but a keen eye on the bank of most reservoirs will most often do just fine. These areas will offer cover to the bass in the form of broken asphalt and concrete, gravel, ditches along the side of the old road, and an occasional bridge. The flat area of the roadbed becomes an avenue for both bait fish and the bass. Furthermore, roadbeds are prime spawning flats, especially the old gravel roadbeds.
Ledges and breaks are similar to points that extend into the water. They are a prime area for the angler interested in structure fishing. The drop offs may be in increments of only a few feet, but can also have vertical drops of twenty feet or more. When approaching these areas watch for bait fish, if present the bass will most likely be close by. Drop offs and ledges are perfect locations for vertical presentations like bouncing a jig or working a spoon.
Under water humps and ditches will quite often hold bass. Humps give a bass an area to locate in water shallower than the surrounding water and the security of being away from the shoreline where anglers often prowl. Ditches are usually found a short way from the shoreline and often create the subtle depth changes bass are looking for.
In your search for areas to fish don't overlook obvious targets like man made brush piles and fallen down trees. These targets are bombarded with lures every day but if you fish them thoroughly they can pay big dividends. Also, don't pass up a boat dock that has good cover or deep water close by. On many older lakes docks are a major source of cover for the fish.
Current and sun, or lack of, can influence the way a bass will hold on a particular piece of cover or structure. In most situations when current is flowing bass will be facing into the current for a better position to ambush bait fish. Therefore it is always a good idea to present your offering with the current. Bass have a tendency to swim around more when current is not prevalent. Sun light, in most cases, will cause bass to hold tighter to cover. For a long time it was thought this was true because bass don't have eyelids and the bright light hurt their eyes. However, now it is believed the reason is due to the fact it is much easier to ambush prey from a darker area looking into the more lighted area.
There are a lot of conditions to consider when putting together a plan of action on unfamiliar water. All the above-mentioned conditions play a major role in the way a bass will behave. The areas mentioned are by no means a complete list of areas to locate concentrations of bass. However, if you will take a close look at both water and weather conditions as well as the time of year when considering these areas, it will make you a better angler. Fishing is a thinking game and bass will generally react the same way as in the past when conditions repeat themselves. Bass are creatures of habit and anglers should count on the oldest and biggest ones to usually follow the same routines to get that way.
Copyright 2008, Marc Rogerswww.midwestfishingtackle.net
Your fishing trip has been planned for many weeks. You and your favorite fishing partner have gone over every detail to assure nothing has been forgotten. The night before leaving you will find it hard to sleep. The thoughts of where and how you will catch the fish have been filling your mind most of the night. The reasons for the meticulous planning are because you have limited time on the water and you have never been on the body of water you are about to visit.
When most anglers arrive at an unfamiliar body of water they have already obtained as much information about it as possible. Anglers are notorious for knowing what the fish are being caught on before they ever leave home. We will have our whole weekend planned around how others have caught fish at our destination. However, the information we receive may not be current or even correct. The information may have come from a newspaper fishing report that is only as good as its source. While I was on a guided trip in Florida’s Lake Okeechobee, the guide told me when the local newspaper and radio stations contact him he will either tell them the productive lures or the areas, but never both. The best way to avoid the problems of other angler's information is to listen but remember it is not etched in stone. Fishing is a very dynamic sport where productive methods can change in a very short time.
Many anglers feel that most productive fishing days are the result of a systematic, analytical approach. The best way to get started is to eliminate as much water as possible; break down the whole area into many small areas; eliminate water considered very deep for the particular body of water. Bass are generally more active when positioned in shallow water. The most important things to consider when developing a game plan are the type of water you are fishing, the time of the year, water condition, and weather condition.
The type of water will play a major role in the areas and lure types I begin with. When I refer to type of water these questions arise. Are you going to fish a shallow lake or river where anglers consider deep water ten feet or more; are you visiting a mid-land reservoirs where there are lots of small creek and a few large river channels present; or is your destination a high-land lake where there are sheer bluff walls and deep, clear water? The answer to this question is the first step in a series of items you must consider. The others, though they seem simple, are major pieces to the puzzle.
The time of year must be considered. Fish will behave certain ways during particular seasons. During winter months the water temperature is cold and the fish are lethargic. In the summer fish tend to be the most active but can become lethargic when the water temperatures rise to extremes and the oxygen levels fall. Water condition, particularly temperature and clarity, must be thought about carefully. Bass are a cold blooded creature and their metabolism is directly affected by the water temperature they live in while water clarity dictates how well and far fish can see in the water. All of these things play a part in the sport we call fishing. When you arrive at your destination consider all the things mentioned and use past experiences to get started. Also, look for areas like points, roadbeds, ledges and breaks, underwater humps, and ditches. These types of structures have proven to hold concentrations of fish.
Points have long been a productive place for anglers. Bass use them for migrations routes and staging areas when traveling between deep water. As air and water warm in the spring bass move up from deeper water into shallow areas to spawn. During the summer they will often travel from deep to shallow water on a daily basis. They will move to the shallow areas at night as the surface water cools and return to deep water as temperatures began to rise during the day time hours. Points have long been a favorite of both the bass and the angler.
Roadbeds are used by bass as migration routes and they are also easily found by anglers. A good topographical map is an excellent tool for finding roadbeds, but a keen eye on the bank of most reservoirs will most often do just fine. These areas will offer cover to the bass in the form of broken asphalt and concrete, gravel, ditches along the side of the old road, and an occasional bridge. The flat area of the roadbed becomes an avenue for both bait fish and the bass. Furthermore, roadbeds are prime spawning flats, especially the old gravel roadbeds.
Ledges and breaks are similar to points that extend into the water. They are a prime area for the angler interested in structure fishing. The drop offs may be in increments of only a few feet, but can also have vertical drops of twenty feet or more. When approaching these areas watch for bait fish, if present the bass will most likely be close by. Drop offs and ledges are perfect locations for vertical presentations like bouncing a jig or working a spoon.
Under water humps and ditches will quite often hold bass. Humps give a bass an area to locate in water shallower than the surrounding water and the security of being away from the shoreline where anglers often prowl. Ditches are usually found a short way from the shoreline and often create the subtle depth changes bass are looking for.
In your search for areas to fish don't overlook obvious targets like man made brush piles and fallen down trees. These targets are bombarded with lures every day but if you fish them thoroughly they can pay big dividends. Also, don't pass up a boat dock that has good cover or deep water close by. On many older lakes docks are a major source of cover for the fish.
Current and sun, or lack of, can influence the way a bass will hold on a particular piece of cover or structure. In most situations when current is flowing bass will be facing into the current for a better position to ambush bait fish. Therefore it is always a good idea to present your offering with the current. Bass have a tendency to swim around more when current is not prevalent. Sun light, in most cases, will cause bass to hold tighter to cover. For a long time it was thought this was true because bass don't have eyelids and the bright light hurt their eyes. However, now it is believed the reason is due to the fact it is much easier to ambush prey from a darker area looking into the more lighted area.
There are a lot of conditions to consider when putting together a plan of action on unfamiliar water. All the above-mentioned conditions play a major role in the way a bass will behave. The areas mentioned are by no means a complete list of areas to locate concentrations of bass. However, if you will take a close look at both water and weather conditions as well as the time of year when considering these areas, it will make you a better angler. Fishing is a thinking game and bass will generally react the same way as in the past when conditions repeat themselves. Bass are creatures of habit and anglers should count on the oldest and biggest ones to usually follow the same routines to get that way.
Copyright 2008, Marc Rogerswww.midwestfishingtackle.net
Flipping and Pitching
FLIPPING AND PITCHING ARE KEYS TO BIG BASS
There are many fishing techniques used to catch big bass. Most anglers, if asked, would have an opinion on the most effective ways of taking big bass on a consistent basis. Most professional anglers would agree the most productive means of catching big bass is to use the flipping and pitching techniques.
While both flipping and pitching are great ways to fish, pitching is the most efficient because you can cover water faster. Tournament pro Tom Biffle prefers pitching because he can not only cover more water, he can make longer casts which results in less chance of spooking the fish.
Biffle uses a Quantum seven and one half foot rod with a high speed Quantum reel for most of his pitching. At times he will use a slower reel for the added power necessary to pull big fish from heavy cover. His reel is spooled with clear line in 25-30 pound test. Biffle seldom loses fish because he uses a long rod, heavy line, and ties the Palomar knot.
The rubber-skirted jig is the most popular bait for flipping and pitching. It is usually rigged with a plastic crawfish or pork frog. Traditionally the pork frog has been used for cold water condition and the plastic crawfish for warm water. This is beginning to change among anglers. Biffle says, "I have caught a lot of bass using a plastic crawdad trailer in cold water." He prefers the crawdad because it doesn't turn on the hook and cover the point like the pork frog sometimes does. Many fish have been lost due to this problem. Also, he prefers compact baits because it penetrates the cover better than large bulky bait.
When flipping and pitching with a plastic worm, I recommend using a paddle tail worm. They will fall through heavy cover better. Ribbon tail worms are the worst choice for heavy cover because the tail will wrap around a small limb or weeds and hang up. They are easy to shake free but will not fall at the intended target when you shake them loose.
After you choose your target make your presentation to the thickest part of the cover. Do not start at the outside edges and work your way into the heavy area. Biffle says when bass are holding on buck brush and brush piles the big fish will always be in the middle of the cover. When fishing heavy cover you can use the limbs to your advantage by hanging your bait over one to get a vertical presentation. This allows you to slowly move the bait keeping it in the strike zone longer.
Finding the fish is most of the battle of fishing. Once located, you can try different presentations to confirm the most effective. When looking for fish in the heavy cover you should first consider water temperature. In the spring and summer when the water is warm I look to the back of the coves and creeks with heavy cover. According to Biffle, the buck brush holds more fish in the spring when the bass are spawning. In the summer the willow trees are more productive. During late fall through early winter concentrate on points close to deep water. When fishing points concentrate on areas of the points where submerged brush piles are present. You will find the brush piles will concentrate bass and will greatly increase your success.
While fishing heavy cover treat each piece as a miniature lake, by doing so you can create a pattern within a pattern. After finding the primary pattern, (type of cover, depth, area of lake or river, etc.) I concentrate on what I was doing when a fish was caught. This involves paying close attention to things as whether the fish was taken on the outside or middle of cover; near a small point or cut in the cover; was I using a vertical presentation with aid of a limb, etc... These little differences can make the difference between success and failure.
If you have trouble with backlashes while pitching you are probably loading (flexing the rod by pulling the line tight) when holding the bait. What you should be doing instead is holding the bait in your hand and lifting the rod while releasing the bait. This will cause a pendulum effect and allow for longer and more precise casts. The faster you raise the rod tip the longer the cast will be. At the moment the bait passes over the target you should lift the rod tip while thumbing the spool to a stop. This causes the bait to stop and fall vertically for a quiet entry.
There are a few common mistakes anglers should avoid when flipping and pitching. Flipping requires the angler to be close to the target and in clear water conditions the result is often spooked fish. Pitching allows you to make longer casts to avoid this problem. With both techniques the goal is to have the bait enter the water quietly. A low trajectory on the cast will provide a quiet entry. Also, while flipping, many anglers are still holding the line after the cast is made. Since most bites will occur on the initial fall, by holding the line they leave themselves in a position where a good hook set is impossible.
During seminars Biffle stresses the importance of learning to flip with your less dominate hand. He says since most of the strikes occur on the fall a right handed person will be changing hands to crank the reel when the fish picks up the bait. By learning to pitch and flip with the less dominate hand you will become much more successful.
Next time you are on the water try flipping and pitching for big bass. They are slower than many other techniques but day in and day out they will consistently produce big bass.
Copyright 2008, Marc Rogers
http://www.midwestfishingtackle.net/
There are many fishing techniques used to catch big bass. Most anglers, if asked, would have an opinion on the most effective ways of taking big bass on a consistent basis. Most professional anglers would agree the most productive means of catching big bass is to use the flipping and pitching techniques.
While both flipping and pitching are great ways to fish, pitching is the most efficient because you can cover water faster. Tournament pro Tom Biffle prefers pitching because he can not only cover more water, he can make longer casts which results in less chance of spooking the fish.
Biffle uses a Quantum seven and one half foot rod with a high speed Quantum reel for most of his pitching. At times he will use a slower reel for the added power necessary to pull big fish from heavy cover. His reel is spooled with clear line in 25-30 pound test. Biffle seldom loses fish because he uses a long rod, heavy line, and ties the Palomar knot.
The rubber-skirted jig is the most popular bait for flipping and pitching. It is usually rigged with a plastic crawfish or pork frog. Traditionally the pork frog has been used for cold water condition and the plastic crawfish for warm water. This is beginning to change among anglers. Biffle says, "I have caught a lot of bass using a plastic crawdad trailer in cold water." He prefers the crawdad because it doesn't turn on the hook and cover the point like the pork frog sometimes does. Many fish have been lost due to this problem. Also, he prefers compact baits because it penetrates the cover better than large bulky bait.
When flipping and pitching with a plastic worm, I recommend using a paddle tail worm. They will fall through heavy cover better. Ribbon tail worms are the worst choice for heavy cover because the tail will wrap around a small limb or weeds and hang up. They are easy to shake free but will not fall at the intended target when you shake them loose.
After you choose your target make your presentation to the thickest part of the cover. Do not start at the outside edges and work your way into the heavy area. Biffle says when bass are holding on buck brush and brush piles the big fish will always be in the middle of the cover. When fishing heavy cover you can use the limbs to your advantage by hanging your bait over one to get a vertical presentation. This allows you to slowly move the bait keeping it in the strike zone longer.
Finding the fish is most of the battle of fishing. Once located, you can try different presentations to confirm the most effective. When looking for fish in the heavy cover you should first consider water temperature. In the spring and summer when the water is warm I look to the back of the coves and creeks with heavy cover. According to Biffle, the buck brush holds more fish in the spring when the bass are spawning. In the summer the willow trees are more productive. During late fall through early winter concentrate on points close to deep water. When fishing points concentrate on areas of the points where submerged brush piles are present. You will find the brush piles will concentrate bass and will greatly increase your success.
While fishing heavy cover treat each piece as a miniature lake, by doing so you can create a pattern within a pattern. After finding the primary pattern, (type of cover, depth, area of lake or river, etc.) I concentrate on what I was doing when a fish was caught. This involves paying close attention to things as whether the fish was taken on the outside or middle of cover; near a small point or cut in the cover; was I using a vertical presentation with aid of a limb, etc... These little differences can make the difference between success and failure.
If you have trouble with backlashes while pitching you are probably loading (flexing the rod by pulling the line tight) when holding the bait. What you should be doing instead is holding the bait in your hand and lifting the rod while releasing the bait. This will cause a pendulum effect and allow for longer and more precise casts. The faster you raise the rod tip the longer the cast will be. At the moment the bait passes over the target you should lift the rod tip while thumbing the spool to a stop. This causes the bait to stop and fall vertically for a quiet entry.
There are a few common mistakes anglers should avoid when flipping and pitching. Flipping requires the angler to be close to the target and in clear water conditions the result is often spooked fish. Pitching allows you to make longer casts to avoid this problem. With both techniques the goal is to have the bait enter the water quietly. A low trajectory on the cast will provide a quiet entry. Also, while flipping, many anglers are still holding the line after the cast is made. Since most bites will occur on the initial fall, by holding the line they leave themselves in a position where a good hook set is impossible.
During seminars Biffle stresses the importance of learning to flip with your less dominate hand. He says since most of the strikes occur on the fall a right handed person will be changing hands to crank the reel when the fish picks up the bait. By learning to pitch and flip with the less dominate hand you will become much more successful.
Next time you are on the water try flipping and pitching for big bass. They are slower than many other techniques but day in and day out they will consistently produce big bass.
Copyright 2008, Marc Rogers
http://www.midwestfishingtackle.net/
Monday, July 21, 2008
Fishing Vertical Edges Can Be Very Productive
Many anglers pass by some very productive areas in lakes while traveling to their fishing destinations each and every day. Some head off to shallow flats while others prefer long extended points in deeper water. To some extent the type of water available in each lake determines the type of areas fished. In Florida most waters are shallow due to the make up of the surrounding terrain. Lake Okeechobee has common lake level at 14 feet above sea level. However, Table Rock Lake in southwest Missouri has a normal summer pool of 915 feet above sea level. Anytime bluff walls are available in a body of water anglers should give serious consideration to fishing them.
Bluff walls have most any type of situations anglers may be looking for when fishing. Bluffs can be fished shallow by targeting the areas where the surface water meets the bluff as well as fished deep by presenting a lure in a vertical presentation. Many submerged points and rock edges (shelves) are also available on bluff walls. Furthermore, they generally are located on an outside river channel swing, which is sometimes an ideal area to catch fish.
Most bluff walls don’t fall off into really deep water immediately. They have a stair step process down to the deepest water. This is where the edges are created and often time hold concentrations of fish. This allows the fish to move in the water column to their preferred depth without having to move long distances. They can move up and down while still having the luxury of maintaining a close distance to cover. Keep in mind that most bluffs also have submerged trees that once grew out of the sides of them before the lake was impounded. These trees are great cover for most any game fish.
A variety of lures can be used while fishing bluff walls. Both crank baits and spinner baits are ideal for retrieving along the face of a bluff while maintaining a preferred depth.
Allowing these lures to deflect off the submerged trees can often trigger reaction strikes from fish as well.
Jigs are also a great lure to use in these areas. Jigs can be cast perpendicular to the water’s edge and worked slowly out into deeper water while allowing the lure to rest on the submerged rock shelves. The most common mistake made when fishing bottom bouncing lures on bluff walls is an angler may take up to much line during the retrieve. With a jig resting on a rock ledge the angler will lift the rod tip and turn the reel handle while the lure is falling. This will bring the lure out into deeper water and often keep it from resting on the next ledge.
To eliminate this problem the angler should allow the lure to fall on a semi-tight line until it makes contact with the next ledge. A semi-tight line is necessary to allow the angler to feel strikes while the lure is falling. Also, it pays to be a line watcher in this situation. Many times a slight twitch in the line will indicate a fish has picked up the lure on the fall.
The draw backs of using any bottom bouncing lure on bluffs is the tendency for them to get hung up on the edges of rocks as well as lodged in the many crevices in the structure. I have found a football type jig head is the least likely to get stuck in these areas. A jig head with a 60-degree bend in the hook eye will also lessen the chance of your line and knot from getting damaged by the rough terrain. My jig of choice for this style of fishing is an All-Terrain Tackle Rock Jig. The All-Terrain Tackle jig also features a waffle type surface on the bottom of the head, which I believe creates better feel of the bottom.
A shaky head jig presentation has become very popular over the last couple of years. I have incorporated this presentation into bluff fishing as well. These types of jig head used in combination with a small worm or crawdad lure are excellent choices for bluff fishing. A spinning outfit is best used in this situation because it allows anglers to opt for lighter line and the bail of the reel can be easily opened to allow a lure to free fall along the bluff. Keep in mind that a shaky head presentation is really just a different form of fishing a more traditional jig.
My favorite shaky head is the Gambler Giggy Head with a Gambler Giggy Stick or Crawdaddy attached. The Gambler Giggy Head is designed so the head of the lure is pushed onto a barb, which is molded, into the head and then the hook is inserted into the bait. This design allows the lure to easily come free from the jig head when a fish strikes and keeps the lure from balling up on the hook point. This jig head has helped me to catch more fish where other jig heads would have had the hook point covered with the lure due to it sliding down the hook.
There are countless ways to present lures on bluff walls. Use your favorites and don’t be afraid to experiment with others. Bluffs can be fished on the water’s surface down to the dark depths. Just remember these area hold almost all of the type of cover and structure anglers like to fish but concentrate them into much smaller areas.
Copyright 2008, Marc Rogers
Many anglers pass by some very productive areas in lakes while traveling to their fishing destinations each and every day. Some head off to shallow flats while others prefer long extended points in deeper water. To some extent the type of water available in each lake determines the type of areas fished. In Florida most waters are shallow due to the make up of the surrounding terrain. Lake Okeechobee has common lake level at 14 feet above sea level. However, Table Rock Lake in southwest Missouri has a normal summer pool of 915 feet above sea level. Anytime bluff walls are available in a body of water anglers should give serious consideration to fishing them.
Bluff walls have most any type of situations anglers may be looking for when fishing. Bluffs can be fished shallow by targeting the areas where the surface water meets the bluff as well as fished deep by presenting a lure in a vertical presentation. Many submerged points and rock edges (shelves) are also available on bluff walls. Furthermore, they generally are located on an outside river channel swing, which is sometimes an ideal area to catch fish.
Most bluff walls don’t fall off into really deep water immediately. They have a stair step process down to the deepest water. This is where the edges are created and often time hold concentrations of fish. This allows the fish to move in the water column to their preferred depth without having to move long distances. They can move up and down while still having the luxury of maintaining a close distance to cover. Keep in mind that most bluffs also have submerged trees that once grew out of the sides of them before the lake was impounded. These trees are great cover for most any game fish.
A variety of lures can be used while fishing bluff walls. Both crank baits and spinner baits are ideal for retrieving along the face of a bluff while maintaining a preferred depth.
Allowing these lures to deflect off the submerged trees can often trigger reaction strikes from fish as well.
Jigs are also a great lure to use in these areas. Jigs can be cast perpendicular to the water’s edge and worked slowly out into deeper water while allowing the lure to rest on the submerged rock shelves. The most common mistake made when fishing bottom bouncing lures on bluff walls is an angler may take up to much line during the retrieve. With a jig resting on a rock ledge the angler will lift the rod tip and turn the reel handle while the lure is falling. This will bring the lure out into deeper water and often keep it from resting on the next ledge.
To eliminate this problem the angler should allow the lure to fall on a semi-tight line until it makes contact with the next ledge. A semi-tight line is necessary to allow the angler to feel strikes while the lure is falling. Also, it pays to be a line watcher in this situation. Many times a slight twitch in the line will indicate a fish has picked up the lure on the fall.
The draw backs of using any bottom bouncing lure on bluffs is the tendency for them to get hung up on the edges of rocks as well as lodged in the many crevices in the structure. I have found a football type jig head is the least likely to get stuck in these areas. A jig head with a 60-degree bend in the hook eye will also lessen the chance of your line and knot from getting damaged by the rough terrain. My jig of choice for this style of fishing is an All-Terrain Tackle Rock Jig. The All-Terrain Tackle jig also features a waffle type surface on the bottom of the head, which I believe creates better feel of the bottom.
A shaky head jig presentation has become very popular over the last couple of years. I have incorporated this presentation into bluff fishing as well. These types of jig head used in combination with a small worm or crawdad lure are excellent choices for bluff fishing. A spinning outfit is best used in this situation because it allows anglers to opt for lighter line and the bail of the reel can be easily opened to allow a lure to free fall along the bluff. Keep in mind that a shaky head presentation is really just a different form of fishing a more traditional jig.
My favorite shaky head is the Gambler Giggy Head with a Gambler Giggy Stick or Crawdaddy attached. The Gambler Giggy Head is designed so the head of the lure is pushed onto a barb, which is molded, into the head and then the hook is inserted into the bait. This design allows the lure to easily come free from the jig head when a fish strikes and keeps the lure from balling up on the hook point. This jig head has helped me to catch more fish where other jig heads would have had the hook point covered with the lure due to it sliding down the hook.
There are countless ways to present lures on bluff walls. Use your favorites and don’t be afraid to experiment with others. Bluffs can be fished on the water’s surface down to the dark depths. Just remember these area hold almost all of the type of cover and structure anglers like to fish but concentrate them into much smaller areas.
Copyright 2008, Marc Rogers
Subscribe to:
Posts (Atom)